Product description Injector puller pump + 20T actuator + broken injection 2.0 CDTI / 3.0 JTD / HDI / HPI and others
A set for removing injectors (universal) and seized injectors.
Hydraulic pump + Through cylinder + 6 bolts + Set for removing seized
injectors. Hydraulic injector puller with through cylinder, hydraulic pump and base. The set is richly equipped for removing seized injectors with adapters with double fixing of injectors, including piezo.
The advantage of the set are screws with double fixing thanks to which we catch the seized injector in two places (double thread or thread and injector body) which eliminates the possibility of breaking the thread!
Tested on cars:
OPEL VIVARO, RENAULT TRAFIC 2.0 CDTI / IVECO, FIAT DUCATO, JUMPER 3.0 JTD, HDI, HPI
Hydraulic pump 20 tons
Thread size of the connection [“] – 13 / 16-20UNEF
Maximum load [tonnes] – 20
Weight [kg] – 7.1
The pump is widely used in a mechanical plant and not only for, among others: workshop presses, spreaders, suspension pullers, injector pullers, cylinders, etc.
Hydraulic cylinder 20 tons
Outside diameter: 78mm
Piston diameter: 35mm
Through hole: fi 20
Piston projection: 15mm
Capacity depending on the pump up to 20 TON.
6 hardened screws:
M14 x 1.5 (240 mm)
female thread screw M14 x 1.5 (315 mm)
female thread M17 x 1.0 (240 mm)
female thread M17 x 1.0 (315 female thread screw ) mm)
Screw external thread M18 x 1.5 (250 mm)
Screw external thread M25 x 1.0 (240 mm)
4 hardened bolts with double attachment for BOSCH injectors
Adjustable feet and base
Wrench for injector valves
Support for hydraulic cylinder support
Sliding cylinder on the beam
Screws with double attachment: catches the injector and thread on the coil which eliminates thread breakage.The base can be adjusted
: Spacing width: 17-30 cm Spacing
length: 16-20 cm
Height: 11.3-13.8 cm
adapter is attached to the piezoelectric injector by the fuel connection and the notch on the injector body.
Facilitates pulling out the injector and reduces thread breakage.In addition, tap and screw for broken injectors
– tap + M15x0.5 lead screw for broken Common Rail injectors cars: Citroen, Peugeot, Renault, Ford, Suzuki.